5.7L '89 Formula 350: H&R Sport Springs, K&N air filter, Dynomax exhaust w/ no cats, MSD wires, Bosch MAF, sevice by Fuel Injection Specialties, full synthetic "engine lube", 1.21 jigawatt flux capacitor, and full synthetic blinker fluid. Built and maintained by members of the San Antonio F-Body Association.
Also would you happen to know if the Diablo Trinity will turn the AFM off without a custom tune?
Yes sir. Consider for the expense of the Diablo Trinity you might as well just buy Hp Tuners basic and invest in a real deal tuning software suite. I admit its hard to pay $350 for a Superchips handheld when Hp Tuners basic can be purchased for $450 . I started off with a handheld and upgraded to Hp Tuners shortly thereafter starting with a copy of my handhelds max tune. I would get Hp Tuners basic + www.thetuningschool.com Advanced Tuning School documents. Its literally a step by step approach to tuning a car. Literally click for click with Hp Tuners screen shots.
Have you considered buying (2) DMH Electic Oval cutouts to go on your stock exhaust system (1 left 1 right after the cats?) Would give you the sound your looking for without the warranty worry wart of installing headers? Also let me know when your ready to get that axleback. I get 50% off Magnaflow MSRP.
Joined: Aug 2005 Gender: Male Posts: 1,575 Location: Alamo Ranch
Re: 2-10-12 meet « Result #4 Today at 9:03pm »
bushs chicken??? the meets at lindquist chevy...however we might be there if we get there late..all the oldtimers that dont have to work park in the lot. lol we should show up at 8 when they are leaving LOL
iv never been what kinda cars go out to Catroville?
I've seen lots of Harley's one time when I was comming back from Del Rio.
ROB: A bush chicken meet @ Castroville will be nice, if the weather is too cold. There is always lucky burger (well, whenever I can talk to my mom's friend to convince them to stay open a while longer)
Check in on General board, I think. There is a poll going on about what the plans are this weekend. Because of V-day, we are doing something on Friday night instead of Saturday this weekend.
Any luck on pricing? I found the flowmaster for 659.00 with free shipping. The magnaflow street series I found for 865 with free shipping. I would rather give you a chance and support our local dealer before I order from other places.
I would rather have snow than all the rain we have been having. how are things going duff?
I'm just happy to have a job!!! Not as lucrative as the oil rigs, and keeps me away from the family for longer periods, but again it's a job.
Just started a workout regimen because I'm tired of my physical condition. Was surprised to find out I wasn't as heavy as I thought by 15 pounds Oh well, just means more fat to lose.
-STOCK ENGINE - STOCK TRANS - STOCK 10-BOLT - Best 1/4 Mile: 12.18 @ 114 (3360# race weight)- SLP CAI & LID w/K&N, Hooker LTs w/SLP SS 3" LM1 system Hurst 6-speed shifter, UMI Adj. T/A, !Air!, TBB, Lakewood LCAs, BMR Adj. PHR, Spohn LCA relocation brackets, minor HP Tuners usage w/ 1/4 tank gas NEW 4.30 rear to test yet
1998 PONTIAC TRANS AM SLP LID K&N FILTER CUSTOM SHIFT KNOB.UMI STRUT TOWER BRACE AND SFC PACE SETTER LONG TUBES AND 3 INCH ORY BMR LOWERING SPRINGS ... COMING IN 09 HEADS AND CAM STS TURBO???????
Joined: Aug 2005 Gender: Male Posts: 1,208 Location: Texas
Re: Purchased my first Lincoln welder today! « Result #16 Today at 5:06pm »
You're kidding aren't you Ricardo? Al is by no means a welder yet and didn't (surprisingly) say anything about making money... Many people are simply looking for encouragement when they get new tools/toys (and in this case same thing)
-STOCK ENGINE - STOCK TRANS - STOCK 10-BOLT - Best 1/4 Mile: 12.18 @ 114 (3360# race weight)- SLP CAI & LID w/K&N, Hooker LTs w/SLP SS 3" LM1 system Hurst 6-speed shifter, UMI Adj. T/A, !Air!, TBB, Lakewood LCAs, BMR Adj. PHR, Spohn LCA relocation brackets, minor HP Tuners usage w/ 1/4 tank gas NEW 4.30 rear to test yet
-STOCK ENGINE - STOCK TRANS - STOCK 10-BOLT - Best 1/4 Mile: 12.18 @ 114 (3360# race weight)- SLP CAI & LID w/K&N, Hooker LTs w/SLP SS 3" LM1 system Hurst 6-speed shifter, UMI Adj. T/A, !Air!, TBB, Lakewood LCAs, BMR Adj. PHR, Spohn LCA relocation brackets, minor HP Tuners usage w/ 1/4 tank gas NEW 4.30 rear to test yet
84 z28, All out track car as of 8-1-08 12.2358 @ 111.50 mph 89 IROC clone, with a 350 tpi. 15.2 with the stock cam and tune on drag radials. 14.4 with the new cam and tune on street tires. 98 ss, #0890, ls1, t56, lid, short shifter. Get times when I learn how to launch a stick car. LS7 clutch, Z06 cam, 243 heads, arp hardware, 30k short block looking for a T56 to rebuild.
1998 PONTIAC TRANS AM SLP LID K&N FILTER CUSTOM SHIFT KNOB.UMI STRUT TOWER BRACE AND SFC PACE SETTER LONG TUBES AND 3 INCH ORY BMR LOWERING SPRINGS ... COMING IN 09 HEADS AND CAM STS TURBO???????
1998 PONTIAC TRANS AM SLP LID K&N FILTER CUSTOM SHIFT KNOB.UMI STRUT TOWER BRACE AND SFC PACE SETTER LONG TUBES AND 3 INCH ORY BMR LOWERING SPRINGS ... COMING IN 09 HEADS AND CAM STS TURBO???????
Joined: Aug 2005 Gender: Male Posts: 1,575 Location: Alamo Ranch
Re: 2-10-12 meet « Result #33 Yesterday at 7:24pm »
sorry for the folks that have voted already but what time are we gonna meet at each place..last time we met for castroville it was at 530 and everyone was late and we didnt get parking..if were gonna park down the street then we could meet at any time.